Planning an acrylic shop board, reception logo, backlit wall sign, or acrylic LED storefront? This acrylic sign board price India buyer’s guide explains real per sqft price drivers, BRS SIIGNS warranty expectations, material choices and smart quote checks before you approve a signage vendor.
Sharp edges, glossy faces and modern reception appeal.
Works well with backlit, edge-lit and channel-letter lighting.
Good results when sealed, mounted and wired properly.
LED, SMPS and wiring can be planned for maintenance access.
35+ years signage expertise · Fact-checked May 2026 · Read about BRS SIIGNS
Quick answer: acrylic sign board price India depends on acrylic thickness, LED quality, SMPS, ACP backing, letter depth, transport and installation. Simple indoor acrylic boards may start lower, but premium LED/acrylic signage commonly falls around ₹850–₹3,500 per sq.ft at BRS SIIGNS, while 3D letters can range from ₹450–₹4,500 per piece depending on finish and size.
Two boards can both be called “acrylic sign boards,” but one may be a small indoor name plate and the other may be a large LED shopfront sign with ACP, 12 mm backing, waterproof wiring and installation at height. That is why price per sqft must be understood as a specification, not just a number.
Clear PMMA acrylic is widely used because it gives a glass-like appearance at lower weight. For technical context, buyers can refer to BIS material standards and PMMA references such as IS 14753 for PMMA acrylic sheets. In practical signage, thicker acrylic usually improves edge glow and strength, but also increases material, cutting and polishing cost.
Backlit boards need LED modules, power supply, wiring and heat planning. A low quote often saves money by reducing LED density or using weak drivers. For energy-aware buyers, India’s Bureau of Energy Efficiency and its LED lamp standards and labelling references show why LED efficiency and electrical quality matter.
Price rises when the board needs ACP backing, steel frame, safe anchor bolts, scaffolding, high-wall installation or long-distance transport. Outdoor advertising rules vary by city, and safety-focused references such as the National Building Code development-control chapter help buyers understand why mounting cannot be treated casually.
Want the right price, not just the lowest number? Send your board size and photo.
Check PriceUse this table as a practical quotation guide. Final pricing can change by size, quantity, city, artwork complexity, lighting colour, waterproofing and installation access. Taxes and HSN/SAC classification can vary by invoice structure; buyers can cross-check classifications through the official GST HSN/SAC search.
| Type | Typical Build | Guide Price | Best For |
|---|---|---|---|
| Indoor acrylic name plate | 2–3 mm acrylic, no LED | ₹350–₹950/sq.ft | Reception names, door plates, office cabins |
| Backlit acrylic board | 3–5 mm acrylic, LED modules, SMPS | ₹950–₹2,800/sq.ft | Clinics, salons, retail stores, cafés |
| Acrylic edge-lit logo | 8–12 mm acrylic, CNC/laser finish | ₹1,200–₹3,500/sq.ft | Premium reception walls, boutiques, showrooms |
| Trim-cap acrylic LED letters | 12 mm WPC backing, Samsung 2W LEDs | ₹850–₹3,500/sq.ft | Outdoor shopfront and brand fascia |
| 3D acrylic / metal combo letters | Acrylic face with SS/titanium/copper side options | ₹450–₹4,500 per piece | Jewellery, hotel, corporate walls |
| Acrylic + ACP full fascia | ACP backing, frame, wiring, installation | ₹1,200–₹3,800/sq.ft | Multi-brand storefront elevation |
Important: BRS SIIGNS’ official guide rate for LED sign boards using trim-cap acrylic letters, female 12 mm WPC and Samsung 2W LED is ₹850–₹3,500 per sq.ft. Prices vary by size, design complexity and quantity. Contact BRS SIIGNS for a free site-specific quote.
Share one reference image and get a practical material-wise quote.
Send My LogoBest for indoor name plates, reception panels, small office doors and clean non-lit wall branding.
Best for shops, clinics, salons and restaurants that need a glowing face after sunset.
Best for premium reception logos, boutiques, jewellery counters and brand walls.
Best for individual logo letters, front-lit letters and mixed acrylic + SS finishes.
Best for outdoor storefronts using trim-cap acrylic letters, Samsung 2W LEDs and quality SMPS.
Best for full frontage systems where acrylic lighting sits on ACP backing and metal frame.
Acrylic signs are popular across India because they suit both modern indoor branding and outdoor shopfront visibility. For a manufacturing business, retailer, hotel or clinic, the biggest decision is not “acrylic or not”; it is whether the acrylic needs front lighting, back lighting, edge lighting, 3D letter depth or ACP support.
Confused between flat acrylic, backlit acrylic and edge-lit acrylic?
Compare OptionsAcrylic sheets are available in many thicknesses. Commercial references such as REHAU’s acrylic sheet overview explain common sheet formats and thickness choices. In sign boards, 2–3 mm may work for small indoor plates, 3–5 mm is common for many front faces, and thicker acrylic can be used for edge-lit logos or premium stand-off letters.
But thickness alone does not guarantee quality. Cutting accuracy, polishing, adhesive choice, heat management and waterproof sealing decide whether the board still looks premium after a year of dust, cleaning, sunlight and rain. This is where in-house fabrication matters.
BRS SIIGNS was founded in 1989 by Mr. Benjamin and is currently led by Mr. Bennir Raja, B.E. (EEE). The company has 35+ years of experience, 12,000+ installations, 16,000+ delivered projects, 25,000+ happy customers and 30+ dedicated installation crew members. All 7 core signage services are manufactured in-house with zero subcontracting, giving better control over acrylic finish, LED selection and final installation.
For broader manufacturing context, India’s Make in India initiative, MSME support ecosystem and IBEF plastic industry overview show why quality-controlled domestic production remains important for business buyers.
Backlit boards place LEDs behind acrylic or translucent faces. They give even glow for shopfronts, clinics and restaurants. Cost depends on LED spacing, diffuser quality, SMPS capacity and board depth.
Edge-lit signs push light through polished acrylic edges. They look elegant in receptions and boutique walls. Price rises with acrylic thickness, engraving quality and clean edge finishing.
Front-lit acrylic letters use LED inside channel letters, often combined with trim cap, WPC or metal sides. They are strong for outdoor brand visibility and usually need better waterproofing.
LED choices matter because acrylic can show hotspots when lighting is poorly planned. India’s energy-efficiency conversations, including BEE programmes and the UJALA LED efficiency milestone, are reminders that lighting cost should include lifetime electricity, replacement and serviceability, not only first purchase price.
Get a lighting plan that avoids dark patches and LED hotspots.
Plan My SignPan India buyers need to think beyond design. A board for a coastal city needs corrosion-resistant fixing and sealed wiring. A board for a dusty highway frontage needs washable surfaces and strong mounting. A mall reception logo needs neat cable concealment and visual comfort. A national retail rollout needs repeatable dimensions, colour consistency and dispatch planning.
Acrylic LED letters help fashion, electronics, jewellery and franchise shops look sharper than low-cost flex. For chains, standardising acrylic thickness, colour temperature and ACP backing makes every branch look consistent.
Healthcare signs need readable fonts, calm lighting and safe mounting. Backlit acrylic is effective for night visibility without the harsh look of excessive brightness.
Acrylic edge signs, round logo boards and warm backlit panels create a premium entry feel. This is especially useful where Instagram-friendly interiors and first impressions matter.
For outdoor boards, always check local permission rules. The National Portal of India helps users reach government information, while municipal documents such as Tamil Nadu urban local body outdoor advertising rules and industry references such as the IOAA outdoor advertising best-practices code show why structural safety, road visibility and public-space rules matter.
Planning a multi-city acrylic sign rollout?
Ask for Site VisitSend the shopfront, wall or reception photo with approximate width and height on WhatsApp.
Select flat acrylic, backlit acrylic, acrylic edge sign, acrylic letters or LED acrylic combination.
BRS SIIGNS prepares a practical design direction with dimensions, colours and lighting suggestions.
The quote explains size, acrylic thickness, lighting, ACP, installation, transport and warranty.
Acrylic cutting, LED fitting, frame work, wiring and quality checks are completed by the BRS SIIGNS team.
The sign is delivered or installed based on project scope, followed by warranty and maintenance support.
Send your logo, city and board size to start the quote process.
WhatsApp for Quote| Business Type | Recommended Sign | Why | Avg Price |
|---|---|---|---|
| Jewellery showroom | Acrylic edge logo + titanium gold letters | Premium glow, better close-up finish and strong luxury recall | ₹1,800–₹3,500/sq.ft |
| Clinic / hospital | Backlit acrylic board + clear wayfinding | Readable at night, clean healthcare feel and good maintenance access | ₹950–₹2,800/sq.ft |
| Restaurant / café | LED acrylic letters + menu highlight panels | Warm night visibility, photo-friendly frontage and brand colour control | ₹1,200–₹3,500/sq.ft |
| Salon / beauty studio | Round acrylic edge sign or backlit logo | Soft premium glow and strong social-media friendly entrance look | ₹1,200–₹3,500/sq.ft |
| Corporate office | Reception acrylic logo + 3D letters | Professional indoor branding without excessive brightness | ₹450–₹3,500/piece |
| Retail chain | Standardised acrylic + ACP fascia | Repeatable design, faster rollout and consistent brand identity | ₹1,200–₹3,800/sq.ft |
Tell us your business type and we’ll suggest the right acrylic board.
Fix This ProblemA low price can hide thin acrylic, poor LED density, weak SMPS or no installation safety. Always compare specification against specification.
Unbranded LEDs can fade, flicker or fail early. BRS SIIGNS uses quality LED planning and offers 5–7 years warranty on LEDs depending on type.
Outdoor acrylic signs need sealed wiring, drain planning and proper driver protection. Rain can quickly expose poor workmanship.
Large acrylic faces need correct frame, ACP or WPC support. Weak backing can warp, vibrate or make the front look uneven.
Every LED board may need service one day. A smart sign design allows SMPS and modules to be reached without damaging the whole board.
Font size, colour contrast and viewing distance decide real visibility. A beautiful design on screen may fail on a busy road if scale is wrong.
Environmental responsibility also matters. Acrylic is a plastic material, so cutting waste and discarded sign parts must be handled responsibly. Buyers can read official references from CPCB Plastic Waste Management Rules and the CPCB EPR plastic portal for broader plastic-waste compliance awareness.
Avoid a board that looks cheap after six months.
Compare OptionsThese real BRS SIIGNS project-style references show how acrylic can move from simple sign board to premium brand surface. Each caption is unique and written to help buyers connect finish, lighting and use case.
Seen a style you like? Send the screenshot and your board size.
Send My LogoGood acrylic signage is a long-term business asset. Ask whether the vendor gives warranty on acrylic, LEDs, SMPS, ACP and installation. BRS SIIGNS provides 10 years warranty on acrylic, 5–7 years on LEDs depending on LED type, 2 years on SMPS, 2 years on flex/vinyl, and 12 years on ACP and stainless steel.
Before paying advance, confirm these five items: board size, acrylic thickness, LED brand/type, SMPS access, installation scope and transport charges. A professional quote should make the scope clear.
“The acrylic logo board for our reception was bright, neat and easy to maintain. We liked that manufacturing was handled in-house.”
Meenakshi Sundaram“BRS SIIGNS explained acrylic thickness, LED quality and warranty before finalising our showroom sign. The price was clear.”
Sathish Narayanan“Good guidance on price per sqft, LED options and installation. The team suggested a practical acrylic sign.”
R. GokilaNeed a professional acrylic sign board quotation?
Get Free QuoteAcrylic sign board price per sqft in India usually depends on acrylic thickness, lighting, letter depth, ACP backing, installation height and quantity. For BRS SIIGNS LED/acrylic-style sign boards, guide pricing is ₹850 to ₹3,500 per sq.ft, with final quote after size, design and site review.
Acrylic is better when you want a premium, sharp, washable and long-lasting brand face. Flex is more budget-friendly for large temporary displays. For main shopfront branding, backlit acrylic, acrylic edge signs and acrylic letters usually look more premium than ordinary flex boards.
For most outdoor acrylic sign boards, 3 mm to 5 mm acrylic is commonly used, while larger faces, edge-lit logos and premium panels may need thicker acrylic or stronger backing. The correct thickness depends on board size, mounting method, lighting heat and exposure to sun and rain.
BRS SIIGNS is based in Trichy with branch offices in Chennai and Nagercoil. The team manufactures acrylic edge signs, LED sign boards, 3D letters and modular signage in-house, and supports businesses across India depending on project size, delivery and installation requirements.
Yes. LED modules, SMPS, wiring and damaged acrylic faces can often be repaired or replaced if the board is designed with service access. BRS SIIGNS also provides repair and maintenance support for signage projects.
The biggest cost drivers are board size, acrylic grade, lighting density, Samsung LED requirement, SMPS quality, ACP frame, stainless-steel or titanium letters, installation height, transport distance and whether the project needs one board or multiple branches.
Yes, but coastal areas need better waterproofing, corrosion-resistant fasteners, sealed electrical joints and stronger fabrication. Acrylic works well when paired with good ACP, proper drainage, quality SMPS and safe mounting.
BRS SIIGNS provides 10 years warranty on acrylic, 5–7 years on LEDs depending on LED type, 2 years on SMPS, 2 years on flex/vinyl and 12 years on ACP and stainless steel, subject to correct usage and project terms.
For small indoor signs, photos, wall size and logo files may be enough. For outdoor, rooftop, large shopfront, high-rise or multi-branch projects, a site visit or detailed site photo review is strongly recommended before final quotation.
Send your shopfront photo, approximate width and height, logo file, city, preferred lighting style and quantity on WhatsApp to +91 97866 02301. The team can suggest acrylic type, lighting, structure and a site-specific price range.
Send your size, logo, location and reference style. BRS SIIGNS will guide you on acrylic type, lighting, thickness, ACP backing, installation and warranty before you approve production.
Compare related options: acrylic edge sign board manufacturer, LED sign board manufacturer, and 3D metal letters manufacturer.
3, Guru Medical Hall, EVR Road, Puthur, Tennur Post, Tiruchirappalli (Trichy), Tamil Nadu – 620017, India.
Email: brssiigns@gmail.com
Website: brssiigns.co.in
Quote support: +91 97866 02301
